This is a new aftermarket replacement key fob compatible with GM models listed below. This product meets our quality standards and is guaranteed to work the same as an original.
- 2006-2017 Buick Enclave
- 2006-2011 Cadillac DTS
- 2007-2014 Cadillac Escalade
- 2007-2013 Chevrolet Avalanche
- 2011-2015 Chevrolet Captiva Sport
- 2007-2010 Chevrolet Equinox
- 2003-2019 Chevrolet Express
- 2006-2013 Chevrolet Impala
- 2006-2007 Chevrolet Monte Carlo
- 2007-2013 Chevrolet Silverado
- 2007-2014 Chevrolet Suburban
- 2007-2014 Chevrolet Tahoe
- 2009-2017 Chevrolet Traverse
- 2007-2017 GMC Acadia
- 2003-2017 GMC Savana
- 2007-2014 GMC Sierra
- 2011 GMC Terrain
- 2007-2014 GMC Yukon
- 2008-2009 Hummer H2
- 2007-2009 Pontiac Torrent
- 2007-2010 Saturn Outlook
- 2008-2010 Saturn Vue
- 2007-2009 Suzuki XL7
NOTE: 2011 & newer vehicles must be programmed by an automotive locksmith or dealership.
Procedure #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.
1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)
2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
Procedure #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.
1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).
2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.
3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
An aftermarket remote or key is a product that is not associated with the brand of your vehicle. Because of this, they tend to be a bit cheaper than remotes and keys that come from your vehicle's manufacturer.
An aftermarket product will still sync up to your vehicle and work just like a regular remote or key, it just won't have your vehicle's logo.
