This is a new aftermarket replacement key fob compatible with Chrysler Dodge Jeep models listed below. This product meets our quality standards and is guaranteed to work the same as an original.
- 2001-2004 Chrysler Concorde
- 2001 Chrysler LHS
- 2001-2006 Chrysler Sebring
- 2001-2004 Chrysler 300M
- 2001-2004 Dodge Intrepid
- 2001-2006 Dodge Stratus
- 2003-2008 Dodge Viper
- 2002-2004 Jeep Liberty
NOTE: You must have a working remote to self-program this remote. If you do not have a working remote, you must take it to a dealership or locksmith for programming. If procedure #1 does not work, then please try using procedure #2.
Procedure #1
1. Obtain all remotes you would like to use for your vehicle. Insert key into ignition and turn to ON position. (Do not start your vehicle)
2. Press and hold UNLOCK on a currently functioning remote for 5 to 10 seconds.
3. While holding the UNLOCK button during the 5 to 10 second period, press the PANIC button for 1 second and release both buttons at the same time. A chime should sound within 3 seconds to indicate your vehicle has entered programming mode.
4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing the first chime in step 3.
5. Within 30 seconds of completing step 4, press any button on the next remote. Repeat this step for all additional remotes including previously working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.
Procedure #2
1. Obtain all remotes you would like to use for your vehicle. Insert key into ignition and turn to ON position. (Do not start your vehicle)
2. Press and hold UNLOCK on a currently functioning remote for 5 to 10 seconds.
3. While holding the UNLOCK button during the 5 to 10 second period, press the PANIC button for 1 second and release both buttons at the same time. A chime should sound within 3 seconds to indicate the vehicle has entered programming mode.
4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3, then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.
5. Within 30 seconds of completing step 4, press the LOCK and UNLOCK buttons on the next remote and release. You should hear an audible tone indicating that the remote was recognized. Once the tone is heard, press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5 for all additional remotes including previously working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.
An aftermarket remote or key is a product that is not associated with the brand of your vehicle. Because of this, they tend to be a bit cheaper than remotes and keys that come from your vehicle's manufacturer.
An aftermarket product will still sync up to your vehicle and work just like a regular remote or key, it just won't have your vehicle's logo.
