This is a Factory OEM (Original Equipment Manufacturer) Nissan 3 Button keyless entry remote, aka "key fob".
Nissan
- 2002 Mercury Villager
- 2002 Nissan Quest
- 2002 Nissan Xterra
- 2001 Mercury Villager
- 2001 Nissan Quest
- 2001 Nissan Xterra
- 2000 Mercury Villager
- 2000 Nissan Frontier
- 2000 Nissan Quest
- 2000 Nissan Xterra
- 1999 Mercury Villager
- 1999 Nissan Altima
- 1999 Nissan Frontier
- 1999 Nissan Pathfinder
- 1999 Nissan Quest
- 1998 Infiniti QX4
- 1998 Nissan 200SX
- 1998 Nissan 240SX
- 1998 Nissan Altima
- 1998 Nissan Frontier
- 1998 Nissan Pathfinder
- 1997 Infiniti QX4
- 1997 Nissan Altima
- 1997 Nissan Pathfinder
- 1996 Infiniti QX4
- 1996 Nissan Pathfinder
Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.
- Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel.
- Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
- Insert key into ignition and turn to the ACC position.
- Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
- If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
- When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. Test all remotes.
We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:
You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.
The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!