This is a Factory OEM (Original Equipment Manufacturer) Infiniti G20 4 Button keyless entry remote, aka "key fob".
OEM electronics in a new aftermarket case.
1995-1996 Infiniti G20
You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.
- Open The Trunk.
- Close and LOCK all doors with the driver's side power lock / unlock switch located on drivers door panel.
- Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
- UNLOCK then LOCK all doors with the driver's side power lock / unlock switch located on drivers door panel
- Within 5 seconds, push LOCK button on the keyless remote. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
- If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press the LOCK button on the next remote. Repeat this step for each remote.
- When all remotes have been programmed open drivers door to exit programming mode. Test all remotes.
Our Products: