This is a Factory OEM (Original Equipment Manufacturer) Honda Prelude 4 Button keyless entry remote, aka "key fob".

Genuine OEM electronics in a new aftermarket case.

1996-2002 Honda Prelude

2001 Prelude: If your Prelude has Dealer Installed System.

Note:
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode.
You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.

9. Test remote(s)

2001 Prelude: If your Prelude has Factory Installed System

Note:
This system will accept up to three remotes. The remotes are stored in a stacking-type memory. If a fourth remote is programmed the first remote will be erased.

1. Turn ignition switch to ON (II)

2. Within 4 seconds press the LOCK or UNOCK button on one of the remotes. Make sure remote is aimed at the reciever near the glove box.

3. Within 4 seconds turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2

5. Within 4 seconds turn the ignition switch to ON (II)

6. Within 4 seconds press the LOCK or UNLOCK button the same remote. Make sure the power doorlocks cycle to confirm you are in programming mode. Presss the LOCK or UNLOCK buton again.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.

9. Test remote(s)

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!