This is a Factory OEM (Original Equipment Manufacturer) Ford 4 Button keyless entry remote, aka "key fob".
Genuine OEM electronics in a new aftermarket case.
Ford
2007-2011 Ford Crown Victoria
2000-2012 Ford Escape
1998-2003 Ford Escort
1998-2012 Ford Expedition
2000-2010 Ford Explorer
2001-2010 Ford Explorer Sport Trac
2005-2007 Ford Five Hundred
2000-2012 Ford Focus
2004-2007 Ford Freestar
2005-2007 Ford Freestyle
2006-2012 Ford Fusion
2005-2006 Ford GT
1999-2012 Ford Mustang
1998-2009 Ford Taurus
1999-2006 Ford Thunderbird
2003-2005 Lincoln Aviator
1999-2006 Lincoln LS
2001-2012 Lincoln Navigator
1998-2011 Lincoln Town Car
1998-2002 Mercury Cougar
2007-2011 Mercury Grand Marquis
2007-2009 Mercury Marauder
2005-2011 Mercury Mariner
2006 Mercury Milan
2005-2007 Mercury Montego
2002-2011 Mercury Mountaineer
1998-2007 Mercury Sable
1999-2000 Mercury Tracer
*** THERE ARE 2 POSSIBLE PROGRAMMING PROCEDURES. ***
Procedure #1 Note: Obtain all remote transmitters for this vehicle.
Note: Do not depress the brake pedal during procedure.
1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
2. Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
3. Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. For all other remotes.
4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Procedure #2 Note: Obtain all remote transmitters for this vehicle.
1. Fasten seat belts and close all doors.
2. Turn ignition from OFF to RUN 4 times within 6 seconds, with the 4th time ending in RUN. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
3. Turn ignition to OFF. Acoustic signal will sound and system warning lamp will illuminate to confirm programming mode.
4. Within 10 seconds, press and hold any button on the first keyless remote. Wait for acoustic sound and warning lamp to flash (confirming programming) then release button on remote. Wait 2 seconds but within 10 seconds repeat step 4. For all other remotes. If you only have one remote then continue to step 5.
5. Turn ignition to Crank or wait 10 seconds to end programming mode.
We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:
You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.
The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!
