GM 15008009 MYT3X6898B OEM 3 Button Keyless Entry Remote Key Fob

This is a Factory OEM (Original Equipment Manufacturer) GM 3 Button keyless entry remote, aka "key fob".

OEM electronics in a new aftermarket case. This remote can be used as Memory 1 or 2.

GM

• 2009 Chevrolet Trailblazer
• 2009 GMC Envoy
• 2008 Chevrolet Trailblazer
• 2008 GMC Envoy
• 2008 Isuzu Ascender
• 2007 Buick Rainier
• 2007 Chevrolet Trailblazer
• 2007 GMC Envoy
• 2007 Isuzu Ascender
• 2006 Buick Rainier
• 2006 Chevrolet Trailblazer
• 2006 GMC Envoy
• 2006 Isuzu Ascender
• 2005 Buick Rainier
• 2005 Chevrolet Trailblazer
• 2005 GMC Envoy
• 2005 Isuzu Ascender
• 2004 Buick Rainier
• 2004 Chevrolet Trailblazer
• 2004 GMC Envoy
• 2004 Isuzu Ascender
• 2004 Oldsmobile Bravada
• 2003 Chevrolet Trailblazer
• 2003 GMC Envoy
• 2003 Isuzu Ascender
• 2003 Oldsmobile Bravada
• 2002 Chevrolet Trailblazer
• 2002 GMC Envoy
• 2002 Oldsmobile Bravada

1. Close all doors.
2. Insert key into the ignition.
3. Press and hold the power UNLOCK button on driver's side door panel. Do not release until instructed to do so in step 5.
4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just shy of starting your vehicle, OFF is the position where you can remove your key)
5. Release the power unlock button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically. If locks cycle then continue to step 6.(if the door locks begin to lock and unlock BEFORE releasing the unlock button then the vehicle has not entered programming mode and you must start over. Remove key, open door and return to step 1. If the vehicle continues to lock and unlock before releasing the unlock button then there is a problem with the vehicles system and remotes must be programmed by a certified professional. If you are unable to get the door locks to cycle then you are turning the key too quick, too slow, there's a problem with the vehicles system, or the vehicle is not equipped with a factory keyless entry system.
6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds.
7. NOW repeat step 6. for all additional remotes including working ones.
8. After step 6. has been performed for all remotes TURN ignition to ON to exit programming mode.
9. Turn ignition to OFF, remove key and test all remotes.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!