This is a Factory OEM (Original Equipment Manufacturer) Chrysler 3 Button keyless entry remote, aka "key fob".

Remote comes in new aftermarket case with uncut key

Chrysler

• 2007-2009 Chrysler Aspen
• 2006-2010 Chrysler PT Cruiser
• 2008-2010 Chrysler Sebring
• 2007-2014 Chrysler Sebring Convertible
• 2011-2012 Chrysler 200
• 2005-2007 Chrysler 300
• 2008-2011 Dodge Avenger
• 2007-2012 Dodge Caliber
• 2006-2007 Dodge Charger
• 2004-2011 Dodge Dakota
• 2004-2013 Dodge Durango
• 2005-2007 Dodge Magnum
• 2007-2011 Dodge Nitro
• 2006-2009 Dodge Ram
• 2005-2007 Jeep Cherokee
• 2005-2007 Jeep Grand Cherokee
• 2006-2007 Jeep Commander
• 2007-2018 Jeep Compass
• 2007-2018 Jeep Patriot
• 2007-2018 Jeep Wrangler

1. Insert the first valid key into the ignition switch. Turn the ignition to the ON position for at least 3 seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.
2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the vehicle security light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. (Once you're done with this step, it is OK to cut the blank key to match your current key.)
3. Insert a blank key into the ignition switch. Turn the ignition switch to the ON position within 60 seconds. After 10 seconds a signal chime will sound. In addition, the vehicle security light will stop flashing. To indicate that programming is complete, the vehicle security light will turn on again for 3 seconds and then turn off.
4. The new key is now programmed. The Remote Keyless Entry transmitter will also be programmed during this procedure.
5. Repeat this procedure to program up to eight keys.

Please refer to your owner's manual if you are uncertain of the location of LOCK and/or ON positions.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!