This is a Factory OEM (Original Equipment Manufacturer) Chrysler | Dodge | Jeep 3 Button keyless entry remote, aka "key fob".

Genuine OEM electronics in a new aftermarket case.

Chrysler | Dodge | Jeep

• 1996-1998 Chrysler Town & Country
• 1996-1998 Dodge Caravan
• 1999-2000 Dodge Dakota
• 1999-2000 Dodge Durango
• 1996-1998 Dodge Grand Caravan
• 1996-1999 Dodge Neon
• 1999-2002 Dodge Ram
• 1999-2003 Dodge Ram Van
• 1999-2004 Jeep Cherokee
• 1999-2004 Jeep Grand Cherokee
• 1996-1998 Plymouth Grand Voyager
• 1996-1998 Plymouth Voyager

Procedure #1

1. Obtain all remotes you would like to use for your vehicle. Insert key into ignition and turn to ON position. (Do not start your vehicle)

2. Press and hold UNLOCK on a currently functioning remote for 5 to 10 seconds.

3. While holding the UNLOCK button during the 5 to 10 second period, press the PANIC button for 1 second and release both buttons at the same time. A chime should sound within 3 seconds to indicate your vehicle has entered programming mode.

4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing the first chime in step 3.

5. Within 30 seconds of completing step 4, press any button on the next remote. Repeat this step for all additional remotes including previously working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

Procedure #2

1. Obtain all remotes you would like to use for your vehicle. Insert key into ignition and turn to ON position. (Do not start your vehicle)

2. Press and hold UNLOCK on a currently functioning remote for 5 to 10 seconds.

3. While holding the UNLOCK button during the 5 to 10 second period, press the PANIC button for 1 second and release both buttons at the same time. A chime should sound within 3 seconds to indicate the vehicle has entered programming mode.

4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3, then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.

5. Within 30 seconds of completing step 4, press the LOCK and UNLOCK buttons on the next remote and release. You should hear an audible tone indicating that the remote was recognized. Once the tone is heard, press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5 for all additional remotes including previously working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!